DENIOS Ltd
17075 Leslie Street, Unit 9
Newmarket
L3Y 8E1

Tel.: +1-888-905-5353
Email: contact@denios.ca
Internet: www.denios.ca

Temporary Leak Protection

RuptureSealTM is a line of quick and easy leak-stopping devices that is durable, easily deployed in seconds, and forms a secure mechanical seal that stops the leak for hours. Using newly patented technology, RuptureSealTM can safely close breaches, minimize damage, help protect the environment, preserve health and safety, save thousands of dollars through spill remediation, and save lives.

Keep this product on hand if you experience an emergency leak – share up to 10 hours of relief until a permanent fix is available. This industrial-grade, temporary leak protection is operated quickly by compressing a silicone pad into the rupture; it is pulled back promptly on the handle, and the seal becomes mechanically fastened.

The BEST solution for fuel & chemical spills

Better than tape. Better than foam...

Rupture Seal products are available in 4 sizes and compatible with over 40,000+ substances - more than any other product on the market. In just seconds, Rupture Seal creates a safe mechanical seal to plug even rough, unclean or splintered surfaces, making it the best all-in-one solution for the control of fuel and chemical spills, for hazmat and first responders, transport container and saddle tank ruptures, forklift punctures, pipe leaks, breaches and more. Faster to deploy than puddy compounds, urethane foam or wooden/screw plugs - and more accessible to remove after the fact. And unlike sealing tape, Rupture Seal is compatible with fuel leaks.

A fuel leak from as small as a 2" puncture can result in an average of $15,000 in clean-up costs. Your response needs to be fast, clean, and effective. You need a Rupture Seal!

Deploys in Seconds!

Step 1:

Approach the rupture from the side, outside the liquid flow path. Flip the pin so it is parallel with the nylon tie.

Step 2:

Insert the pin into the rupture. Once the nail is in the rupture, quickly let go and drive the plug into it, holding it in place to stop the liquid flow.

Step 3:

GENTLY pull on the handle as you push the plug into the rupture. When the handle is fully extended, and the clicking stops, the RuptureSealTM is deployed.

We are happy to advise you!

Tailor-made advice, and service fulfillment. Our advisors walk the additional mile. Take advantage of our phone, mail, or on-premise service offers.

Expert advice 1-905-551-9519

Related articles

Loading...
i

The specialist information on this page has been compiled carefully and to the best of our knowledge and belief. Nevertheless, DENIOS Ltd cannot assume any warranty or liability of any kind, whether in contract, tort or otherwise, for the topicality, completeness and correctness either towards the reader or towards third parties. The use of the information and content for your own or third party purposes is therefore at your own risk. In any case, please observe the locally and currently applicable legislation.

Menu
Log in
We would be pleased to provide you with advice!

Give us a call or fill out the form and we will get back to you as soon as possible.

Mon - Fri: 08:00 - 17:00

Happy Holidays! During the holiday season, our warehouse will operate with limited capacity from December 17th to January 2nd, with deliveries resuming fully on January 6th. Please note that this may cause delays for some shipments. We appreciate your patience and understanding during this time.