SpillGuard® – the revolution in hazardous substance leak detection
Our engineers have developed the first warning system of its kind - SpillGuard®. A completely self-sufficient, immediately ready for use and suitable for any spill pallet - even in ATEX Zone 0! Leaked hazardous substances within the spill pallet are reliably detected and reported before they can cause significant damage. And installation is easier than ever: Put it in place, switch it on & be safe!
Your advantages
Universal
The SpillGuard® detects leaks of all common liquid hazardous substances and can be fitted to any spill pallet, whether steel or plastic.
Self-sufficient System
The SpillGuard® works completely independently - no accessories, no system requirements. The integrated lifetime battery ensures reliable operation at all times.
24/7 surveillance
Additional security is guaranteed, even outside of the legally prescribed test intervals.
Reliable warning signal
SpillGuard® detects dangerous leaks before you do. You will be warned as soon as the sensitive sensors come into contact with liquid.
Durable
The integrated lifetime battery ensures reliable operation over a long period. So the SpillGuard® can be used for up to 5 years.
Detect leaks more quickly – act in time
The leaking of liquid hazardous substances is not uncommon and can happen at any time. To reliably prevent dangerous substances from getting into the ground, containers should be stored on spill pallets. However, leaking liquids are often not immediately detected in the sump - for example, if personnel are not constantly present or if a regular visual inspection has been forgotten due to everyday operational stresses. An uncleaned leak, however, can quickly become dangerous.
For example, rapid action is required to counteract hazards in the case of susceptible substances that emit dangerous vapours. In addition, the functionality of the spill pallet - and therefore also the compliant sump volume - must be ensured at all times. If liquid is already in the tub, this may no longer be guaranteed.
This is where SpillGuard® comes in. The warning system detects the leak when it comes into contact with the liquid and sounds an acoustic and visual alarm. This ensures that you are warned quickly and that the necessary measures can be taken immediately.
Suitable for ATEX zone 0
SpillGuard® is suitable for ATEX Zone 0 and therefore meets the strictest requirements for explosion protection.
Technical features
| SpillGuard® | |
|---|---|
| Suitable for all common liquid hazardous substances | ✓ |
| Flexible use for any collecting device | ✓ |
| Suitable for use in ATEX Zone | ✓ |
| Powerful battery life (approx. 5 years) | ✓ |
| 24/7 monitoring: Additional security outside of the statutory inspection intervals | ✓ |
| Visual warning | ✓ |
| Acoustic warning | ✓ |
SpillGuard® Resistance list
SpillGuard® is designed for use with all common liquid hazardous substances. The SpillGuard® resistance list shows for which hazardous substances the functionality of the SpillGuard® has been proven over a defined period of at least 24 hours. For a substance not listed in the SpillGuard® resistance list, a laboratory test can be carried out on request to check the suitability of the SpillGuard®. Do not hesitate to contact us!
✓ suitable
✘ not suitable
| Hazardous Material | EC number | Concentration | Suitability |
|---|---|---|---|
| Acetic acid | 200-580-7 | 96% | ✘ |
| Acetic acid ethyl ester | 205-500-4 | 99% | ✓ |
| Acetone | 200-662-2 | 99,7% | ✓ |
| Ammonia Water (-solution) | 215-647-6 | 20% | ✓ |
| Butanone | 200-751-4 | Pure | ✓ |
| Diesel | 270-676-1 | 99,9% | ✓ |
| Engine Oil* | – | – | ✓ |
| Ethanol | 200-578-4 | 99% | ✓ |
| Ethylene glycol | 203-473-3 | 98% | ✓ |
| Gasoline | 289-220-8 | 100% | ✓ |
| Hydrochloric acid | 231-595-7 | 31% (techn.) | ✓ |
| Hydrochloric acid | 231-595-7 | 37% | ✘ |
| Hydrogen peroxide solution | 231-765-0 | 35% | ✓ |
| Iron - (III) -chloride | 231-729-4 | Saturated | ✓ |
| Isobutanol | 201-148-0 | 99% | ✓ |
| Kerosene | 232-366-4 | 100% | ✓ |
| Methyl ethyl ketone | 201-159-0 | 95% | ✓ |
| Nitric acid | 231-714-2 | 10% | ✓ |
| Nitro thinner | 203-745-1 | 100% | ✓ |
| Phosphoric acid | 231-633-2 | 80% | ✓ |
| Potassium hydroxide | 215-181-3 | 40% | ✓ |
| Propanol | 200-746-9 | 99,5% | ✓ |
| Sodium hydroxide | 215-185-5 | 40% | ✓ |
| Sulphuric acid | 231-639-5 | 80% | ✓ |
| Toluene | 203-625-9 | 98% | ✓ |
| Transmission oil* | – | – | ✓ |
| Water | – | – | ✓ |
| Xylene | 215-535-7 | 97% | ✓ |
*Viscosity ≤ 3000 mPas, relative permittivity ≥ 2
Operating instructions & other documents
- View your order history
- Save shopping list and basket
- Save preferred payment method for future orders
Give us a call or fill out the form and we will get back to you as soon as possible.