Product description
- Meets the provisions of ANSI Z358, 1-2014
- Fast treatment in the event of an eye injury
- Auxiliary hand-held drench hose for rinsing eyes, face or body. The unit has 6 ft. reinforced PVC hose
- Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve
- 1/2” IPS chrome plated brass stay-open ball valve with flag handle.
- To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba. After filling with water, pressurize unit to 80 PSI
- Heated and insulated to endure low or freezing temperatures over long periods of time
- Fully freeze-resistant and tempered, for both indoor and outdoor environments
- Highly visible orange Diener Nylon insulation jacket is waterproof and mildew resistant
- Intregrated silicone heater, water temperature inside the tank is regulated by an onboard thermostat set to 65°F
- Total amp draw is 3.33A and delivers 400W of power, which allows the unit to operate to temperatures as low as -20°F
- Comes standard with a 15A Ground Fault Circuit Interrupter (GFCI) with manual reset connected to a 9 foot long cord
Technical data
Color 2 |
Orange |
Regulations and Compliance |
ANSI_Z358 |
Color |
Silver |
Material |
Steel |
Version |
Eye Wash Stations |
Usage |
Eye Wash |
External Dimensions W x D x H [in] |
21 x 21 x 30 |
Shipping Dimensions L x W x H [in] |
24 x 24 x 33 |
Shipping Weight [lbs] |
56 |
Weight |
50.5 |
Documents
Suitable accessories and spare parts